Serpentine Choker Vibrations

Serpentine Choker Vibrations Staff Reviews

Reviewing Member: Gwendolyn Battle on: Wednesday 29th of Feb 2012 Rated: 5/5
Initial off, this CAN be an tensioner pulley for your vehicle. It may possibly not be an tensioner pulley for ALL cars nevertheless. Your finest bet is to evaluate the pulley you just take off and compare it to the measurements listed underneath the specs tab. This pulley is 62mm, which is a three inch pulley. My idler pulleys are three.5", and I presume most GM automobiles are the same, at the very least 3800 II engines will be.I replaced each tensioner pulleys due to some vibration in the pulley and little squeaks. Upon visually inspecting the aged bearings, grease had leaked from the seals, confirming the difficulty. Right after installing the new pulleys, it was great as new.The only dilemma with these Dayco pulleys is that they do not seem to last very extended. Perhaps I'm just staying picky about an [$] pulley, but it appears like they only final about 2 many years. The OEM kinds lasted at minimum four many years (under no circumstances had to change a single beneath car warranty).

Reviewing Member: Carla Welch on: Saturday 25th of Feb 2012 Rated: 4/5
I've been running this for about three months and no problems so much. I employed this to silence an aged noisy pulley. Its a excellent pulley substitution.

Reviewing Member: Bernice Mcleod on: Thursday 23rd of Feb 2012 Rated: 4/5
Match Completely! If you have have two Idler Pulleys, I propose changing the two, particularly if you have high milage on your vehicle! Also, even though you have them out(upkeep sensible), verify your belt tensioner(Spring Assembly, as this aligns your belt),tensioner pulley(bearing), and your Generate Belt. When setting up verify to make sure that the pullies are not rubbing against anything at all right after set up(put some medium [Blue Loctite] on the bolt to avoid bolt from backing out. By all signifies, do not overtighten the bolt!Content Motoring!

Reviewing Member: Irene Workman on: Sunday 5th of Feb 2012 Rated: 5/5
On a dodge 3.3 2007 gran caravan se it can be used as the idler pulley as nicely as the tensioner pulley even even though there is 7mm differance in size diam,the tensioner will comp,for the differance in the pulley measurement it is spring loaded.

Reviewing Member: Norma Massey on: Sunday 29th of Jan 2012 Rated: 3/5
Installed this pulley on my wife's Chrysler minivan. Installation is effortless & vehicle is considerably quieter now. My primary concern is that I have had blended practical experience with components produced in China (like this one) so I am a little involved about the life span of the bearings. On the other hand, I heard that Dayco created the original parts for Chrysler, so this portion may be reputable. I'll submit yet another overview right after we have driven on it for a though.